Buildings

The model represents a small Viennese suburban house, which is typical of the Wilhelminian era.  
The model in detail, walls, sidewalk and roof made of cardboard, double windows made of graphic cardboard backed with window film, light and curtain mask made of paper, dimensions L / W / H = 165/120/130 mm.  Kit

This house is located between baroque and classicism, on the threshold of the Biedermeier era, the model of which is located on Wiener Landstrasse. Walls and pavement made of cardboard, finely engraved roof made of graphic cardboard, double window made of graphic cardboard with window film backed, decorative material, light and curtain mask made of paper, dimensions L / H / W = 107/175/143 mm.  Kit

In the back yards of the suburban houses there were outbuildings for stables, workshops and also for apartments. This outbuilding fits in perfectly with the small Viennese suburban house.  
The kit is unpainted and consists of cardboard, graphic cardboard, window film and a light and curtain mask made of paper. Dimensions L / H / W = 162/88/40 mm.

The Imperial and Royal State Railways (kkStB) had general plans for the railway construction, which were adapted to the respective needs and regionally available materials. Load-bearing parts made of cardboard, filigree parts made of bristol cardboard, outer wall made of fine linden wood, cling film. Dimensions L / W / H = 140/99/71 mm. Kit, mfg by artbeeren.

In the course of the founding period between 1848 and 1914, the cities of Europe expanded to an unimaginable extent. Efficient construction technology prevailed, but it did not want to forego a sufficient amount of pomp. Walls, sidewalk and roof made of cardboard, double windows made of graphic cardboard backed with window film, light and curtain masks made of paper, dimensions L / W / H = 198/133/250 mm. Kit, mfg by artbeeren.

This corner house is designed to match the Wilhelminian style house (item number B-1005). This means that these houses can also be built as a large block with a uniform facade. Walls, sidewalk and roof made of Finn poplar, double windows made of graphic cardboard backed with window film, light and curtain masks made of paper. Dimensions L / W / H = 156/156/250 mm. Kit, mfg by artbeeren.

The model of the dismantled Wilhelminian style house is therefore a sober and unadorned representative from the time of reconstruction. Walls, sidewalk and roof made of cardboard, double windows made of graphic cardboard backed with window film, light and curtain masks made of paper. Dimensions H / W / L = 250/198/133 mm. Kit, mfg by artbeeren.

The model is partly made of lime wood and can adorn practically every small train station in your home. The original can still be found today at the former train station in Großinzersdorf from the Stammersdorfer local railway, which has unfortunately been shut down. Dimensions L / W / H = 60/50/53 mm. Kit, mfg by artbeeren.

"Prater, Hauptallee", it offered a spacious and well-frequented terminal for several tram lines. Today she seems a bit lost. The model is a slightly shortened variant of the boarding point "Prater, Hauptallee" The model is available in the current and original green/black color scheme and also available in the interim brown/green color scheme. Dimensions L/W/H= 188/42/45 mm. Ready made model by artbeeren

The model is a slightly shortened variant of the boarding point "Parater Hauptallee". The model is available in the interim brown/green color scheme. Dimensions L/W/H= 188/42/45 mm.  Ready made model by artbeeren.

On the route of the Leobersdorf railway, the Berndorf station is located directly on the Triesting river. Opened in the summer of 1878, the station building can be considered a very typical representative of small-town station buildings of the imperial-royal state railways (kkStB).  L/W/H= 365/50/150 mm.Kit, mfg by artbeeren.

The suburbs were once rural, with small farms and market gardens being the norm. Only a few have survived into the modern era. The model is a variation on the Romanesque flood (1011), this time designed as a residential building. In addition to the suburban setting, it also fits perfectly into a village. Dimensions L/W/H = 120/185/100 mm, scale 1:87, H0  
Unpainted kit from artbeeren

Real wood parts kit of the station building "Schafbergalm" on the Schafberg rack railway. Highly detailed, precisely laser-cut wood and cardboard kit.

The typical elevated lines of the light rail arches with their large shop portals and the typical railing are the model for this model. The route is designed for two tracks.  L / H / W = 275/125/137 mm. Track height 90 mm. Kit, mfg by artbeeren.

The backdrop solution of the light rail arches offers a cost-effective solution when only one visible side is necessary, for example in the case of dioramas or in the background of a system. The rear wall closes off the viaduct neutrally. The model can also be combined with the bridgeheads. L / W / H / = 275/137/125 mm. Track height 90 mm. Kit, mfg by artbeeren.

B-2002  Kit for 2 small bridgeheads of the Stadtbahn- line.

Total length with anchoring: 253mm, length of the bridge 222mm, length between bridge heads 177mm, length between sidewalks (= width of the street) 135 mm, width 110 mm, maximum passage height 69 mm. Kit, mfg by artbeeren.

A fundamental variation of the light rail arches is the design as a workshop or magazine. Similar arches can also be found in the area of the former connection between the Wiental and the belt line as well as on the suburb line.Kit, mfg by artbeeren.

With this variation of a single light rail arch, a passage is created that can also be used as a passage through side streets. The light rail arch can be combined with all other modules in the light rail arch series. Kit, mfg by artbeeren.

There are more different variations of light rail arches. The template for the arch helps for individual design. L / W / H = 138/137/125 mm, track height 90mm. Kit, mfg by artbeeren.

The curve segment describes an angle of 15°. This allows for small irregularities in the tram line as well as majestic curves. With a radius of around 560 mm at the outer edge (pavement), the curve is small enough to create a 90° curve on a layout without looking unrealistic.

For connection to narrow modules, there is a widening module, which is necessary in the transition to the curve module to ensure sufficient clearance.

Length: 146 mm
Width: 163 mm
Height: 128 mm
Track height: 90 mm

Scale 1:87, H0  
Unpainted kit from artbeeren

3-pack
The curve segment describes an angle of 15°. This allows you to create small irregularities in the tram line as well as majestic curves. With a radius of around 560 mm at the outer edge (pavement), the curve is small enough to create a 90° curve on a layout without looking unrealistic.

For connection to narrow modules, there is a widening module, which is necessary in the transition to the curve module to ensure sufficient clearance.

Length: 146 mm
Width: 163 mm
Height: 128 mm
Track height: 90 mm

Scale 1:87, H0  
Unpainted kit from artbeeren

For connection to narrow modules (2001, 2004, 2005, 2006), there is a widening module that is necessary in the transition to the curve module in order to provide sufficient clearance. Such widenings are not uncommon in the original, although not over such a short distance. The widening module can initiate both a right and a left curve.

The curve is kept free and can be supplemented with any curve filling for straight segments (2101, 2103, 2105, 2107). Of course, there is nothing to prevent you from using your own creativity for your own designs.

Length: 139 mm
Width: 163 mm
Height: 128 mm
Track height: 90 mm

Scale 1:87, H0  
Unpainted kit from artbeeren

The set includes two shop fronts for a straight tram arch.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two business portals for the curve segment.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two arch fillings as a magazine for a straight light rail arch.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two arch fillings as a magazine for a curve segment.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two simple arch fillings for a straight light rail arch.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two simple arch fillings for a curve segment.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two closed shopfronts for a straight tram arch.

Scale 1:87, H0
Unpainted kit from artbeeren

The set includes two closed shopfronts for a curved section of the tram arches.

Scale 1:87, H0
Unpainted kit from artbeeren

The cardboard panels are designed as typical Viennese cobblestones, as can still be found in some side streets.Painted with acrylic paints, you can create an authentic Viennese street with these panels. Dimensions per plate: L/H/W= 227/80/0.9 mm. With two plates you get a real size alley with a width of about 7 meters and a length of 39 meters.  Kit, mfg by artbeeren.

These pavement slabs, which have the structure of a typical Viennese cobblestone, serve to supplement or harmonize. Painted with acrylic paints you create a realistic city design. Dimensions each L/H/W/= 227/25/2 mm. Kit, mfg by artbeeren.

With two different sides, the brick garden wall can be used in a variety of ways in plant construction. The wall can be lined upendlessly, with a little handicraft skill you can also cope with angles or bumps. H / L = 28/140 mm. Kit, mfg by artbeeren.

The rounded corner edges are used in combination with the sidewalk slabs (3002) for the perfect design of a cobblestone sidewalk. The authentic painting is done with acrylic paints. Dimensions L/W/H= 25/25/2 mm. Kit, mfg by artbeeren.

The street segment provides variety in the road surface. Thanks to the form-adapted cut, it can be seamlessly joined together for longer parties. L/W/H= 22.4cm/8cm/0.9mm. Kit, mfg by artbeeren.

The model for this model is on the edge of the Schweizergarten, opposite Fasangasse, and is the only surviving bus shelter from this period. The model is made of biodegradable plastic, the fine window inserts are made of Bristol board. Dimensions L/W/H= 53/38/32 mm.  Ready made model by artbeeren.

The roof panel shows the fine structure of the "Viennese pocket" roof shape, which was mainly used in the late Baroque period, but was also occasionally used in the Wilhelminian period. The structure shows small fine irregularities typical of old roofs. The plate measures 200 × 75mm, the bottom 6mm has the typical roof sheet that was common in Austria below the rain gutters. Kit, mfg by artbeeren.

The roof panel shows the fine structure of the "Frankfurter Pan" roof shape, which was mainly used in the Gründerzeit. The plate measures 200 × 75mm, the bottom 6mm has the typical roof sheet that was common in Austria below the rain gutters. This can also be cut away if necessary. The roof panel can be cut with scissors and must be glued to a substructure, such as 2mm thick cardboard. For maximum authenticity, the substructure remains within the walls so that only the thin roof panel rests on the walls. There are also rain gutters and roof ridges in two versions. This makes the roof panel suitable for your own buildings as well as for adapting standard models to an Austrian roof type.

The manhole covers are specially designed and are placed on the plate. They give a very realistic impression due to the cavity underneath. Dimensions each L/W/H= 22.4cm/8cm/0.9mm. Kit, mfg by artbeeren.

The plate measures 200 × 75mm, the lower 6mm have the typical roof plate that was common in Austria below the rain gutters.  
Model by artbeeren.